page_banner

news

What is an pc solid polycarbonate sheet?

Solid polycarbonate sheet (also known as PC sheet, polycarbonate, solid polycarbonate sheet, bulletproof glass, cabron board, plastic solid sheet, polycarbonate board, aviation perspective sheet) is a high-performance engineering plastic polycarbonate Or polycarbonate-made of acid fat.

Features: impact resistance, unbreakable strength, hundreds of times stronger than tempered glass and acrylic sheet, tough, safe, anti-theft, and bulletproof. Can be arched, bendable: good workability, strong plasticity, can be bent into arches, semicircles, etc. according to the actual needs of the construction site. The widest solid polycarbonate sheet can be 2.1 meters wide and any length.

colored-solid-polycarbonate-sheet

Application

With the continuous development of the economy, the endurance board industry has attracted more and more attention and has been widely used in various industries in life.

It is suitable for the layout of telephone booths, advertising road signs, light box advertisements, display and exhibition; suitable for instruments, meters, high and low voltage switch cabinet panels, LED screen panels and military industry, etc.;

Suitable for deep processing such as thermoforming and blister;

Suitable for daylighting and rain-shading roofs such as canopies, carports, and waiting sheds;

Suitable for noise barriers on expressways and urban elevated roads;

Suitable for agricultural greenhouses and breeding greenhouses;

Suitable for ceiling of modern ecological restaurant;

Widely used in curtains.

polycarbonate-sheet-application

Advantage

(1) Light transmittance: The light transmittance of the endurance board can reach up to 89%, which is as beautiful as glass. UV-coated panels will not produce yellowing, atomization, and poor light transmission under sunlight. After ten years, the loss of light transmission is only 10%, the loss rate of PVC is as high as 15%-20%, and the glass fiber is 12 %-20%.

(2) Impact resistance: The impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic sheets of the same thickness, and 2-20 times that of tempered glass. There will be no cracks even if it falls two meters under a 3kg hammer. The reputation of “glass” and “sound steel”.

(3) Anti-ultraviolet: One side of the PC board is co-extruded with an anti-ultraviolet (UV) coating, and the other side has an anti-condensation treatment, which integrates anti-ultraviolet, heat insulation and anti-fogging functions. It can block ultraviolet rays from passing through, and is suitable for protecting valuable artworks and exhibits from ultraviolet rays.

(4) Light weight: the specific gravity is only half of that of glass, saving the cost of transportation, handling, installation and supporting frame.

(5) Flame-retardant: National standard GB50222-95 confirms that the endurance board is flame-retardant grade 1, namely B1 grade. The ignition point of the PC board is 580℃, and it will self-extinguish after leaving the fire. It will not produce toxic gas during combustion and will not promote the spread of the fire.

(6) Flexibility: According to the design drawing, cold bending method can be adopted on the construction site, and it can be installed into an arch, semi-circular roof and window. The minimum bending radius is 175 times the thickness of the adopted plate, and hot bending is also possible.

(7) Sound insulation: Endurance board has obvious sound insulation effect, and has better sound insulation than glass and acrylic board of the same thickness. Under the same thickness, the sound insulation of endurance board is 5-9DB higher than that of glass. Internationally, it is the material of choice for highway noise barriers.

(8) Energy saving: keep cool in summer and keep warm in winter. The endurance board has a thermal conductivity (K value) lower than that of ordinary glass and other plastics, and the heat insulation effect is 7%-25% higher than that of the same glass. The heat is up to 49%. Thus, the heat loss is greatly reduced. It is used in buildings with heating equipment and is an environmentally friendly material.

(9) Temperature adaptability: PC sheet will not be cold brittle at -40℃, and will not be softened at 125℃, and its mechanics and mechanical properties will not change significantly in harsh environments.

 

Company Name: Baoding Xinhai Plastic Sheet Co.,ltd

Contact Person: Sale Manager

Email: admin@cnxhpcsheet.com

Phone: +8617713273609

Country: China

Website: https://www.xhplasticsheet.com/


Post time: Oct-20-2021

Leave Your Message